先进复合材料及制备讲义.ppt

* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * The simplified FSP machine used in this experiment was a modified form of a horizontal-type milling machine, with a 5 HP spindle. The fixed pin tool was 6 mm in diameter and 6 mm in length. The shoulder diameter was 18 mm, and a 2 tilt angle of the fixed pin tool was applied. The pitch distance was 1 mm. The advancing speed of the rotating pin was kept constant in this study to be 45 mm/min, with a fixed pin rotation of 800 rpm. The plates were fixed by a fixture and ambient air cooling was applied. In