wisconsin州公路及建筑物施工标准规范sect106.pdfVIP

SECTION 106 CONTROL OF MATERIALS 106.1 General (1) Provide materials conforming to the contract. Use materials the contract specifies unless the engineer authorizes substitutes under 108.8. Monitor construction operations to identify potential nonconforming materials and prevent their incorporation into the work. Except as required under the contract, ensure that products incorporated into the work, either temporarily or permanently, do not display advertising or messages that are not directly related to the manufacturer, properties, or function of those products; or advertising or messages in violation of state statutes. (2) All materials are subject to the engineers approval before incorporation into the work. The engineer may inspect or test all materials at any time during their preparation, storage, and use. Notify the engineer of the proposed source of materials before delivering those materials to the project site. If the engineer requests, provide samples of material and access to facilities that the engineer needs to assess the acceptability of all materials. The department will, on request, share with the contractor available information on a source or material. The department will maintain a web-based list of approved aggregate sources. Aggregate producers must provide test results as required in the department policy for aggregate source approval to have their source approved and to keep that approval over time. (3) For fabricated components, the materials and the fabricator are subject to the departments approval before delivery of those components to the project site. The engineer may require the contractor to obtain components from another department-approved source if the department determines that a fabri