中澳班实习报告样本.doc

Tianjin Engineering Technical Institute 毕业实践报告 专业班级： 中澳10-2班 学生姓名：唐伟兵 学 号： 2010160224 指导教师：张玉文 职 称： 高 级 导师单位：天津工程技术学院石化系 完成日期：2013年4月10日 Abstract Graduation practice is very important for the students who will left the college and get into the society. It is very necessary for us to connect the theory with the practice. We can get to better know the deepwater drilling equipment and know their functions. So the practice was very important for me. It made me a good way to work. And graduation practice made me know our special knowledge much better. During the site practice I have got a lot of knowledge which we didn’t get from the books. By my classmate and friend, I want to the drilling company and finish my practice, and then this practice report is written after visiting and working in wellsite. Practice is necessary for us go to work. It can also encourage us to put the knowledge which we learned in class into practice. Its purpose is to make us have a good preparation in knowledge, technical ability, mentality and accomplishment, so as to increase our competence in job hunting and in further self-development. And my main target to lean in deepwater drilling’s troubles , especial its lost. The lost is necessary in drilling process, especial in drilling’s casing and cementing part, so I must learn the knowledge of them to finish my report. Key Words：, deepwater drilling, casing, cementing Contents 1. Introduction of practice 1 2. Practice content: Locating Loss Zones 3 3. Practice content: Seepage Losses 5 4. Practice content: Running Casing and Cementing 7 5. Practice content: Excessive Rate of Penetration 9 Conclusions 10 Acknowledgments 11 References 12 毕业实习报告 1. Introduction of practice From February to April I worked in Bohai drilling company for my graduation practice. There we received a series of drilling know