机动车整车生产一致性审查对照-.pptVIP

机动车整车产品 生产一致性审查要求说明 Explanations on COP (Conformity of Production) Check Requirements for Motor Vehicles 背景 Background 国家认监委2008年1号公告，发布了对汽车产品强制认证实施规则进行修订和证书换版的要求，规则编号变更为CNCA-02C-023:2008。 背景 Background 此次规则的修订主要包含以下四各方面的变化： The revision mainly focus on following 4 aspects 技术参数 technical parameters 型式试验及依据标准 type approval tests and corresponding standards 工厂审查 factory inspection 车辆一致性证书 motor vehicle certificate of conformity 背景 Background 新规则规定的工厂审查需在2011年7月1日前完成。 The factory inspection which according to the new CCC regulation must be finished before 1st Jul,2011. 工厂审查 Factory Inspection 生产一致性控制计划－文件化的规定 COP control plan－Documented provisions 有关生产一致性控制计划的特殊说明 Particular notes to COP control plan 生产一致性现场审查 On-site COP auditing 质量保证能力审查 Quality assurance capability check 生产一致性控制计划执行报告 Executive report of COP control plan 工厂审查 Factory Inspection 工厂审查 FACTORY INSPECTION 08版实施规则的工厂审查包括生产一致性审查和质量保证能力审查。生产一致性审查包括生产一致性控制计划或生产一致性计划执行报告审查以及生产一致性现场审查。而工厂质量质量保证能力审查条款较原规则少了例行检验、确认检验和生产一致性两个条款，这两项内容则要在生产一致性审查中体现。 As specified in the Implementation Rules (version 08), factory inspection consists of COP check and quality assurance capability check. COP check comprises the auditing on COP control plan or executive report of COP plan, and the on-site COP auditing. Compared to the preceding version, two clauses (i.e., routine test and confirmative test) are eliminated as to the quality assurance capability check, which need to be embodied in the COP check. 生产一致性审查是通过生产一致性控制计划及其执行报告的审查和现场审查，确认批量生产的认证产品和型式试验样品的一致性，以及与认证标准的符合性。 COP check is to, via the auditing on COP control plan and its executive report and the on-site auditing, verify the consistence of mass-produced certified products with both the type approval samples and the certification standards. 企业