车辆工程毕业设计（论文）-ZZ1141H5315W型重型载货汽车离合器的设计【全套图纸】.doc

本科学生毕业设计 ZZ1141H5315W型重型载货汽车 离合器的设计 系部名称： 汽车与交通工程学院 专业班级： 车辆工 学生姓名： 指导教师： 职 称： 讲师  Undergraduate graduation design Design of ZZ1141H5315W Type Heavy Cargo Cars Clutch Candidate： Specialty：Vehicle Engineering Class：B07-3 Supervisor： Heilongjiang Institute of Technology  摘 要 离合器是汽车传动系的一个重要部件，其设计的成功与否决定着车辆的动力性、平顺性、经济性等多方面的设计要求。设计出结构简单、工作可靠、造价低廉的，能大大降低整车生产的总成本，推动汽车经济的发展。本文以ZZ1141H5315W车为例，根据车离合器的设计要求和车辆动力传动系统自身车 全套图纸，加153893706 ABSTRACT Clutch auto transmission system, its design is an important part of the success of the power, determines the vehicle smooth, economy, and other aspects of the design requirements. Design a simple structure, reliable operation and low cost, can greatly reduce the clutch atvproduce total cost, promote the development of car economy. Based on ZZ1141H5315W type heavy cargo cars for example, according to the heavy cargo clutch design requirements and vehicle power transmission system characteristic of oneself, through reference documents many articles, and domestic and foreign clutch design manual, from economy and practicability aspects of its analysis, to do a detailed design. This design separately from the clutch of choice, the overall design of diaphragm spring design, the design of the platen assembly and clutch cover assembly design to the calculation of, so as to determine the basic structure and the calculation of parts of the parameters, check with the size, structure the design requirements. Key words：The clutch; The transmission; Heavy cargo car; Assembly; Structure design 摘 要 I Abstract II 第1章 绪论 1 1.1选题的依据、目的及意义 1 1.2重型载货汽车离合器发展现状 1 1.3主要设计内容 3 第2章 离合器总体方案的确定 4 2.1离合器的功用及设计要求 4 2.2离合器的类型 5 2.3重型载货汽车原始参数 6 2.4从动盘的选择 6 2.5膜片弹簧离合器的结构形式选择 7 2.6压盘的驱动方式 7 2.7本章小结 7 第3章 膜片弹簧的设计 8 3.1膜片弹簧主要参数的选择 8 3.2约束条件 9 3.3膜片弹簧的载荷与变形关系 10 3.4膜片弹簧强度计算 11 3.5 12 第4章 离合器从动盘总体设计 13 4.1从动盘设计 13 4.1.1从动片设计 13 4.1.2从动盘毂的设计 13 4.2摩擦片的设计 14 4.2.1 14 4.2.2离合器基