车辆工程毕业设计（论文）-长安杰勋汽车膜片弹簧离合器设计【全套图纸】.doc

本科学生毕业设计 长安杰勋汽车膜片弹簧离合器设计 院系名称： 汽车与交通工程学院 专业班级： 车辆工程 学生姓名： 指导教师： 职 称： 讲师　 The Graduation Design for Bachelors Degree Design of Changan Jiexun Automobile Diaphragm Spring Clutch Candidate： Specialty：Vehicle Engineering Class：07-6 Supervisor：Lecturer Heilongjiang Institute of Technology  摘　　要 离合器是汽车传动系中的重要部件，主要功用是是切断发动机对传动系的动力传递，保证汽车平稳起步，保证传动系统换挡时工作平顺以及限制传动系统所承受的最大转矩，防止传动系统过载。此设计说明书详细的说明了膜片弹簧离合器的参数选择以及计算过程。 本文根据长安杰勋汽车的性能参数，确定了以推式膜片弹簧离合器作为设计目标。根据推式膜片弹簧离合器工作原理和使用要求，确定了各部分的基本结构及其零部件的制造材料。按照系统化的设计方法确定了离合器的摩擦片外径D、后备系数β、单位压力P、摩擦因数f、摩擦面数z以及离合器间隙Δt，设计了膜片弹簧、从动盘总成、离合器盖总成和分离操纵机构，对压盘进行了温升校核，对摩擦片进行了滑摩功校核。 全套图纸，加153893706 关键字：离合器；膜片弹簧；从动盘；摩擦片；操纵机构 ABSTRACT Clutch is an important part of vehicle drivetrain, main function is to cut off engine power to the transmission system, ensure the car a smooth start to ensure works smooth shifting of the transmission system, and limits the maximum torque on the transmission system, prevent drive system overloads. This design gave a detailed description of the process parameters selection and calculation of diaphragm spring clutch. This article according to the Changan JieXun performance parameters of the car, identified as a design goal to push the diaphragm spring clutch. According to push the diaphragm spring clutch work principle and application requirements, determines the basic structure of the parts and components manufacturing materials. Ascertained in accordance with systematic design method of the clutch friction plate diameter d, reserve coefficient β, pressure p, f, the number of friction surface friction coefficient z and clutch gap Δt, design the diaphragm spring, clutch driven plate Assembly, clutch cover Assembly and separation control, checking the temperature rise of the pressure plate, checking the friction of sliding friction. Key words: Clutch；iaphragm spring；riven plate；riction plate；Control 目　　录 摘要 I Abstract II 第１章 绪论 1 1.1 引言 1 1.2 选题的目的及