GB/T 1591-2008低合金高强度结构钢.pdf

The National Standard of P.R. China GB/T1591-2008 replaces GB 1591-1994 High strength low alloy structural steels Issued on 2008-12-06 Carried out on 2009-10-01 This standard refers to and adopts EN10025:2004 HOT ROLLED PRODUCTS OF STRUCTURAL STEEL to revise GB/T 1591-1994 High strength low alloy structural steels. 1. Subject and Scope The designation, dimension, shape, weight, tolerance, technical requirements, testing methods, inspection regulations, packing, marks and quality certificate of the high strength low alloy structural steels are stipulated in the standard. The standard is applicable to common structural high strength low alloy steel sheets, steel straps and shapes and steel sticks. 2. Reference standards Items in the following documents quoted by this standard became parts of it. All the modified lists or revised version of the dated quoted documents are not applicable to this standard. But it is encouraged to research whether it is ok to use the newest version of these documents by the parties of the agreements for this standard. All the newest versions of undated quoted documents are applicable to this standard. GB/T 222 Tolerance of chemical compositions for steel finished products. GB/T 223.5 steel iron determination of soluble silica and all-silica contents Reduced form silicate spectrophotography GB/T 223.9 steel, iron and alloy determination of aluminium Chromazurine S spectrophotography GB/T 223.12 chemical analysis of steel, iron and alloy GB/T 223.14 chemical analysis of steel, iro