毕业设计（论文）-基于单片机的多传感器检测报警系统设计.docVIP

摘 要 随着“信息时代”的到来，传感器技术得到了的进步，其应用领域越来越广泛，对其要求越来越高，需求越来越迫切。 为了提高对传感器的认识和了解，尤其是对温湿度、烟雾、酒精传感器的深入研究及其用法与用途，基于实用、广泛和典型的原则而设计了发设计了这一 本文运用以单片机作为主控制器，DHT11、MQ-2、MQ-3分别作为温湿度、烟雾浓度、酒精浓度传感器并与其他电子元件相结合的方法，提出了采集温度、湿度、酒精浓度和烟雾浓度值并实时显示，认为按键可以调节报警参数值，采集值超出设定报警值时实现声光报警。构建了一系列的框图，原理图，程序，得出了当前的温湿度，烟雾浓度，酒精浓度，并且能够正确调节及实现报警。 单片机和温湿度、烟雾、酒精传感器为核心设计的多传感器检测报警系统可实现浓度显示、按键调节、报警限设置等功能。具有一定的实用价值。 关键字：单片机STC89C52，传感器，AD转换 The temperature and humidity, alcohol concentration, smog density detection alarm system Abstract With the arrival of the information age, the sensor technology had been significant progress, its application field, more and more widely, the demand is higher and higher, demand more and more urgent. It in every field has a pivotal role, so the sensor to keep the high accuracy, high reliability, miniaturization, the power consumption passification-oriented and intelligent digital development, in order to better service to our production and life. In order to improve the sensor to know and understand, especially to the temperature and humidity, smoke, alcohol sensor research and its usage and use, based on practical, widely and typical principle and design the hair design the multi-sensor instrument detection alarm system. This paper with the single chip processor as the main controller, DHT11, MQ-2, MQ-3 respectively, smoke concentration, temperature and humidity as alcohol concentration sensor with other electronic components and the method of combining the proposed acquisition temperature, humidity, alcohol concentration and smoke density and real-time display that can adjust the alarm button parameter value, the collection value beyond set alarm value achieve sound and light alarm. Building a series of block diagram, diagram, procedures, and draw the conclusion that the temperature and humidity of the current, the smoke concentration, alcohol concentration, and can adjust the correct and realize the alarm. Single-chip microcomputer and the temperature and humidity, smoke, alc