西门子Synco200通用控制器组态配置.pptVIP

Date Title 修改预置的应用程序 应用资料中没有适合的预置程序？ 使用组态配置图 组态配置图的结构 物理输入 组态配置图 – “编程三部曲” – 概览 定义物理输入点的输入标示 组态配置图 – 流程 – 第一步 组态配置图 – 流程 – 第二步 组态配置图 – 流程 – 第三步 练习 RLU232, Basic Type A 1. Definition of the Plant’s Function – Exercise 1 Solution - Configuration diagram - RLU232 basic type A Room humidity control Configuration diagram 练习 ：恒温恒湿机组控制 例子：修改预置的应用程序 解决方案：对标准应用程序进行重新组态 解决方案：对标准应用程序进行重新组态 例子：修改预置的应用程序 解决方案：对标准应用程序进行重新组态 解决方案：对标准应用程序进行重新组态 练习 1 练习 1: 解决方案 练习 2 (在练习 1 答案的基础上) 练习 2 ：解决方案 练习 3 (在练习 2 答案的基础上) 练习 3 ：解决方案 练习 4 练习 4 ：解决方案 练习 5 (在练习 4 答案的基础上) 练习 5 ：解决方案 Tool: Engineering case Important: Here, the adapted application ADC005 LU3 HQ of the Application Catalog shall be referenced and used as a working tool. Explanation of basic rules with the help of the configuration diagram and an application example on the engineering case: Input rules: Designation can be a unit, or a special sensor (outside temp., room temp., frost, setpoint adjuster) Multiple use of inputs is possible, no limits (e.g. differential pressure sensor for fan belt monitoring and release signal for electric air heater) When changing an input identifier, all associated settings will change (e.g. XP was 28 K before, now it is 10 Pa) Output rule: Output functions must be wired to the respective terminal, every output terminal can be used only once (e.g. N.Q1 for Pump 1) Target group: Service staff, engineering Course objective: The course participant will be able to adapt preprogrammed applications from the Application Catalog to the plant in question (adapted applications) be familiar with the Configuration Diagram- principle: inputs, controllers, aggregates- working with the Configuration Diagram be familiar with the basic rules of the Configuration Diagram (e.g. internal wiring, multiple use of sensors, aggregates controlled by several sequences) Note: Existing connections must first be canceled before new ones can be established. ....... Siemens sans siemens sans bold siemens sans italic siemen