采矿工程毕业设计（论文）-潘三矿1.8Mta新井初步设计【全套图纸】.doc

摘 要本设计包括三个部分：一般部分、专题部分和翻译部分。 一般部分为t/a新井设计共10章：1.矿区概述及井田地质特征2.井田境界和储量3.矿井工作制度设计生产能力服务年限4.井田开拓5.准备方式区巷道布置6.采煤方法7.井下运输8.矿井提升9.矿井通风与安全技术10.矿井技术经济指标。F1断层作为与未来的潘四矿之分界线，南部以13-1煤层-900m水平的底板等高线作为深部的井境界，矿井东西走向长约9.3km，南北倾斜宽约5.8km，面积约54km2。 矿区铁路专用线与阜淮线、淮南线连接，向东南经合肥至芜湖，可延伸至沪杭、皖赣线，向西约90公里经阜阳至京九线各站，公路30公里与206国道相接。水运由淮河进入长江，在淮河建有自营码头，专门从事煤炭的水运业务。煤炭主要销往淮南平圩与洛河电厂及江浙一带，交通十分便利。矿井最大涌水量为1000m3/时，正常涌水量为700 m3/时；煤质为气煤；全矿井最大绝对瓦斯涌出量为50 m3/min，属高瓦斯矿井；煤层具有一定的自燃发火危险性，自然倾向性等级为Ⅱ级，煤尘具有一定的爆炸危险性。 矿井采用立井单水平上下山开拓运输，辅助运输采用。 矿井年工作日为30 d，工作制度“三八”制。专题部分题目是翻译部分关于Study on mining the protective seam with the manless working face in coal and gas outburst mines。 关键词：立井；采区；综采；中央并列式；两翼对角式 全套图纸，加153893706 Abstract This design includes of three parts: the general part, special subject part and translated part. The general part is a new preliminary design of Pansan wells that annual output is 1.8Mt . The design includes ten chapters: 1. Mine and mine geological features outlined; 2. Waida realm and reserves; 3. Mine system, design capacity and length of service; 4. Waida develop ; 5. to prepare the way - with the district roadway layout; 6. mining methods; 7. underground transport; 8. mine hoist; 9. mine ventilation and security technologies; 10. mine the basic technical and economic indicators. Pansan Mine located in the northwest of Huainan City Anhui Province Huaihei River, south-east of Huainan City Dongshan from about 34 km. Is located in Fengtai County, due north, about 15 km away from town. An administrative division under the jurisdiction of Huainan City area, Ida range across Panji, Luji, Tianji and Hetuan. Pansan Mine the verge of the Huaihe River, the east from the 9th line and the Panyi Mine adjacent to the west, the 15th exploration lines and the small set of exploration area adjacent to the north F1 fault as mine and mine of the future four-line Pansi Mine , 13-1 coal-900m south to the level of bottom contour as the realm of deep wells, mines east-west length of about 9.3km, North-south tilt