毕业设计（论文）-刨煤机截割部设计及滑靴设计（全套图纸）.doc

中文题目:刨煤机截割部设计及滑靴设计 外文题目：the design of coal plow’s cutting department and slippery boots 全套CAD图纸，联系153893706 毕业设计（论文）共47 页（其中：外文文献及译文12页） 图纸共4张 完成日期 2011年6月 答辩日期 2011年7月 摘要 进入90年代以后，我国刨煤机采煤技术未能得以更广泛的应用，原因是多方面的，有设备性能的问题，有薄煤层开采投入多产出少的的因素，也有对刨煤机采煤技术研究不够的原因。目前国产刨煤机还只能刨削软煤层及中硬度下煤层，而国外先进国家的刨煤机已能刨削硬煤层，甚至极硬煤层，极大地提高了刨煤机的适用范围。德国在80年代初，快速刨煤机的比例已占刨煤机总数的50%，发展到现在，快速刨煤机以基本取代了慢速刨煤机。而在我国，刨煤机功率小，速度慢，仍是普遍存在的问题。 本文研究考虑到生产成本和实用价值，，Abstract At the beginning of the 1990s, Chinas plow mining technology had not been more widely used, there are many reasons, have equipment performance, the problem of thin seam mining output invest more small factors, have to plow mining technology research is not enough reason. Currently domestic Plows could only dig and cut soft coal seam under hardness, and the advanced foreign countries Plows have been able to dig hard seam cut, and even consisting of extremely hard seam, which has greatly enhanced the Plow scope of application. Germany in the early 1980s, rapid Plow the proportion accounted Plow 50% of the total development to the present, Quick Plow to replace the basic slow Plow. In China, Plow power small, slow, it is still common problem. This paper studies the design of the plow and the Ministry of cutting Slipper. Taking into account the cost of production and the practical value and plow the working environment, I designed the cutting unit, basically all components of existing products, to facilitate direct selection of products. Slipper of the past are planing and the first welding together, and once the Slipper was planing mill bad the whole of the first can not be used. I Slipper design is removable. If Slipper be sharpened bad, it could be disassembled to adopt a new way, so that the whole plane can continue to work first. Hopefully, I can design for the future Plow improvements to help. Key words: coal Plows;cutting department ;Slippery botts; 前言 1 1简介 2 1.1 刨煤机简介 2 1.2 截割部简介与滑靴简介 2 1.2.1截割部简介： 2 1.2.2滑靴简介： 2 1.3 国内外研究现状 2 1.3.1国外研究