毕业设计（论文）-基于IEEE 802.16 QoS机制的接入控制策略的研究.doc

摘要关键字 Abstract With the development of communication, the wireless access technology tend to be broad band and IP. And the IEEE 802.16 which is the standard of 3G, have become the focus of the industry for its advantage. As many kinds of multimedia service appear, and the requirements of these services are different, provide QoS guarantee for the different service have become the important and challenged task. Although the MAC layer of IEEE 802.16 have defined the structure of the QoS mechanism、interoperability system of signal、classify and management of the service and the distribution of bandwidth, it leave the parameter mapping、flow adjusting、scheduling arithmetic and access control arithmetic to the developer. CAC(Call Access Control) is the important mechanism of QoS, its main task is to judging whether accept a new connection requirement, according to the type of the connection、requirement of QoS、requirement of bandwidth and the condition of network resource. Because of the restrict of bandwidth resource, it have to find a balance point between assure the QoS requirement and accept more connection. It allow to degrade the level of the connection so as to release some resource to accept more connection, but the basic QoS of the degraded connection must be satisfied. And also set the priority for the different service and adopt different strategy of CAC. In the paper, the backgroud and development of 802.16 protocol will be introduced first, and then analyze the protocol mainly about the physical layer and MAC layer, following research the QoS mechanism, finally research the arithmetic of CAC and simulate the arithmetic by using Matlab. Key word： IEEE 802.16；physical layer；MAC layer；QoS；access control. 目 录 第一章 绪论 1 1.1 论文背景 1 1.2 论文研究的主要内容 2 1.3 论文的结构安排 2 第二章 IEEE 802.16体系结构 3 2.1 网络拓扑结构 3 2.1.1 PMP拓扑结构 3 2.1.2 Mesh拓扑结构 3 2.2 IEEE 802.16协议模型 4 2.3 物理层 5 2.4 MAC层 7 2.4.1 汇聚子层（CS） 7 2.4.2 公共部分子层（CPS） 7 2.4.3 安全子层 8