工业工程毕业设计（论文）-基于Minitab软件的凸轮轴加工质量控制.doc

摘 要 凸轮轴作为发动机配气机构中的关键部件，其性能直接影响着发动机的性能。因此凸轮轴的加工工艺有特殊要求，合理的加工工艺对于降低加工成本、减少生产环节以及增加产品的合格率具有很大的现实意义。质量控制是为了凸轮轴加工过程中的质量稳定，提高凸轮轴加工的合格率。企业要在激烈的市场竞争中生存和发展，仅靠方向性的战略性选择是不够的。残酷的现实告诉我们，任何企业间的竞争都离不开“产品质量”的竞争，没有过硬的产品质量，企业终将在市场经济的浪潮中消失。而产品质量作为最难以控制和最容易发生的问题，往往让供应商苦不堪言，小则退货赔钱，大则客户流失，关门大吉。因此，如何有效的进行过程控制是确保产品质量和提升产品质量，促使企业发展、赢得市场、获得利润的核心。所以，从理论和技术上对产品的加工质量进行控制非常重要。本课题以凸轮轴加工中的不合格产品为依据，运用质量工程理论并结合Minitab数据分析软件，找出产品的不合格因素，分析该因素产生的原因，并提出相应的解决方案，使得凸轮轴的加工不合格率得到有效的控制，提升公司的效益。 关键词：凸轮轴 质量控制 合格率 竞争 MinitabABSTRACT Camshaft for engine valve mechanism s key component, its performance directly affects the engine performance. Special requirements on processing technology of camshaft, a reasonable process for lower processing costs, reduce production processes and to increase the rate of qualified products is of great practical significance. Quality control is the quality of camshaft machining process stability, improving the camshaft machining rate. Enterprises to survive and develop in the fierce market competition and strategic choice of direction alone is not enough. The harsh reality tells us that any competition between enterprises cannot be separated from the quality of competition, there is no perfect product quality, enterprise will eventually disappear in the tide of market economy. And as the most difficult to control product quality and the most prone to problems, often vendor lackluster small return loss, customer loss, go bust. Therefore, effective control is the process of ensuring the quality of products and improve product quality, promote enterprise development, market, profitable core. So, on the theory and technology on product quality control is very important. Camshaft Machining failure rate as the basis, using quality engineering theory and the combination of Minitab software for data analysis, find out the product failure factors, analyze the causes, and proposes the corresponding solution, so that the camshaft grinding failure rate can be controlled effectively, enhance t