毕业设计（论文）-基于PLC的光缆护套90挤塑机组电气控制设计.docVIP

毕 业 设 计（论文） 题 目光缆护套Φ90挤塑机组电气控制设计 专 业 　物理学（电子信息）　 前言 随着信息时代的到来，信息的传送量呈爆炸性增长。作为大容量、长距离传输的有效手段，光纤光缆得到了大量应用，增长速度令人称奇。行业的发展推动着技术的进步。新的光缆结构不断出现，制造技术得到改进。光缆技术方面的研究非常活跃。elements.Repass analyse and transact the electric signal;And in-phase control the whole system.Finally,do the T-chart of the disposal signal,and write the formality.In this design,we adopt the 590 direct current control system.The 6RA23 direct current equipment. Key words: The Ray Cable,Direct Current Timing,Electric Control,In-phase Control,PLC Formality Control 第1章 590控制系统、PLC介绍 1.1 英文资料 System Design The 590 Series Converter is designed for use in suitable enclosure,with associated control equipment.The unit accepts standard three-phase ac supply voltages in the range 110v to 660v,depending upon the model, and is suitable for the powering of DC shunt filed and permanent magnet motors,providing controlled dc output voltage and current for armature and field. All units are designed for simple and economical panel mounting using keyhole slots.Plug-in control connectors simplify the fitting and removal of the unit to the panel. Where possible,standard parts are used throughout the range thereby reducing the variety of spare parts required to maintain a multi-drive system.For example,the same basic control boards are used in all types of three-phase armature controller regardless of horsepower or bridge configuration. The control circuit is totally isolated from the power circuit thus simplifying the interconnection of controllers within a system and improving operator safety.The coding circuitry adjusts automatically to accept supply frequencies between 45-65Hz and possesses high immunity to supply-borne interference.The armature controllers are phase rotation insensitive. Control and Communications The Converter is controlled by a 16 bit Microcontroller proving advanced features such as: Complex control algorithms which are not achievable by simple analog techniques. Software-configur