毕业设计（论文）-基于ProE的硒鼓右侧盖注塑模具设计.docVIP

唐 山 学 院 毕 业 设 计 设计题目：基于Pro/E的硒鼓右侧盖注塑模具设计 系 别：_________________________ 班 级：_________________________ 姓 名：_________________________ 指 导 教 师：_________________________ 2009年6月10 日基于Pro/E的硒鼓右侧盖注塑模具设计 摘 要 模具是制造业的重要基础工艺装备，工业产品大批量生产和新产品开发都离不开模具，用模具生产制件所达到的高精度，高复杂程度，高一致性，高生产率和低耗能、低耗材，使模具工业在制造业中的地位越来越重要。 Pro/E 一模两腔 潜伏式浇口 The design of injection mold about the right side of the cartridge based on Pro / E Abstract Mold is an important foundation for the manufacturing process equipment, the high-volume production of industrial products and new product development are inseparable from the mold. The high precision, high complexity, high consistency, high productivity, low-power and low supplies of parts producted by mold motivates the mold becoming more and more importan in the manufacturing sector. The paper is the study of the right side of the printer cartridge, by use of Pro / E software to build the right cartridge for the analysis of injection mold design. The content mainly includes three-dimensional shape of Injection molded parts, three-dimensional modeling of mold, two-dimensional mold assembly and the processing technology of the right cartridge cavity. In this mold design, the main is the structure of the mold. Including the choice of gate, the determination of surface, the design of sprue puller, cooling system, the mainstream channel and branch runner design and the institution of Mandril. Due to the requirement of the surface, this design used the latent-type gate with the secondary. Key words: the right side of the cartridge ；injection mold ；Pro/E ; the two-cavity mold; Latent-type gate 目 录 1 引言 1 1.1选题的目的与意义 1 1.2注塑模具发展现状 1 1.3 注塑模具发展的影响因素 2 1.4 本设计的主要内容 2 2 塑件分析 4 2.1塑件材料分析 4 2.2塑件的结构工艺性 4 2.2.1塑件尺寸与精度 5 2.2.2塑件表面质量 6 2.2.3塑件外形 6 2.2.4塑件脱模斜度 7 2.2.5塑件圆角 8 2.2.6塑件壁厚 8 2.3塑件的体积和质量 8 3 成型零部件的设计 10 3.1型腔数目的确定与布置 10 3.1.1型腔数目的确定 10 3.1.2型腔的布置 10 3.2分型面的设计 10 3.2.1分型面确定的要点 10 3.3排气系统的设计 11 3.3.1排气系统的选择 11 3