毕业设计（论文）-某110kV变电站二次部分设计.docVIP

南 昌 工 程 学 院 毕 业 设 计 (论 文) 机械与电气工程学院 系（院） 电气工程及其自动化 学生姓名 班 级 06电气工程 学 号 指导教师 胡 雪 云 完成日期 2010 年 06 月 18 日  某110kV变电站二次部分设计 The designing of 110kV Transformer Substation of The Second Part 总计 毕业设计（论文） 44 页 表 格 5 个 插 图 14 幅 摘 要 本设计This design is part of a 110kV substation design, design elements include: short circuit current calculation, the choice of transformer, transformer relay configuration and tuning, control system and the central signal system.  First of all, the book under the mandate given by a system diagram of all possible short-circuit point of failure, then the short-circuit points respectively symmetric and asymmetric short-circuit current calculation circuit current calculation; selection in the transformer, the main is to select the current mutual inductance devices and voltage transformer, and its thermal stability, dynamic stability test; main transformer protection is the focus of this design, including gas protection, longitudinal differential protection, overcurrent protection, backup protection, and the kind of protection setting calculation and verification; the design of fifth and sixth chapters primarily designed control system and the central signal system, through the circuit breaker control of substation automation, and a variety of possible failure or abnormal operation state, through the signal display to adjust in time. ?? The designed part of the substation design, implementation, a device for electrical protection and control, in order to achieve optimal operation of substations.  Keywords: Substation；Second part；Short-circuit current；Relay protection 目 录 摘 要 Ⅱ Abstract Ⅲ 第一章 绪 论 1 1.1 二次系统的基本概念 1 1.2 二次系统设计的作用和地位 1 第二章 短路电流的计算 3 2