毕业设计（论文）-PLC物料自动混合系统设计.docVIP

题目：物料自动混合系统设计 中文摘要 可编程控制器（PLC）是以微机技术为核心的通用工业自动控制装置，也可以说它是一种用程序来改变控制功能的计算机。随着微处理器、计算机和通信技术的飞速发展，可编程序控制器PLC已在工业控制中得到广泛应用，而且所占比重在迅速的上升。PLC主要由CPU模块、输入模块、输出模块和编程装置组成。它以其功能强大、可靠性高、编程简单、使用方便以及体积小、功耗低等突出的优越性，应用于工业混合搅拌设备，使得搅拌过程实现了自动化控制、并且提升了搅拌设备工作的稳定性，为搅拌机械顺利、有序、准确的工作创造了有力的保障。在医药、食品、化工等行业中，几种物料的合成、混合及反应时是很常见的工序。设计所介绍的多种液体混合的PLC控制程序可进行单周期或连续工作，具有断电记忆功能，复电后可以继续运行，可直接接控制电机、电磁阀等电动执行机构。 关键词 ：可编程序控制器PLC，搅拌机，潜水泵，加热器 Abstract The programmable controller (PLC) is take the microcomputer technology as the core general industry automatic control device, may also say that it is one kind changes the control function with the procedure the computer. Along with the microprocessor, the computer and communications swift development, programmable controller PLC obtained the widespread application in the industrial control, moreover accounts for the proportion in the rapid rise. PLC mainly by the CPU module, the load module, the output module and the programming unit is composed. It is formidable by its function, the reliability is high, the programming is simple, the easy to operate as well as the volume are small, the power loss low status prominent superiority, applies in the industry mix agitation equipment, caused the agitation process to realize the automated control, and has promoted the agitation equipment work stability, was smooth for the rabbling mechanism, the order, the accurate work have created the powerful safeguard. In professions and so on medicine, food, chemical industry, several material syntheses, mix and reaction time is the very common working procedure. This article introduced many kinds of liquid mixs PLC control procedure may carry on the monocycle or the continuous working, has the power failure memory function, after relegramming in reply, may continue to move, may meet directly controls the electrical machinery, the solenoid valve and so on electric operator. Key word : Programmable logic controller（PLC）Mixer, Dives the water pump, Heater 目 录 1 前言 1 1.1 论