毕业设计（论文）-PC机数据采集系统设计.docVIP

PC机数据采集系统设计 电子工程 摘要：Abstract: The technological development of micro-electron tube, sensor and computer attributes to the revolution in the field of instrument. Virtual instrument used to be rare in the test and measurement and industrial automation industries. Today, it has freed many engineers from the limitations of traditional instruments. Now more than ever, engineers recognize the benefits of the integrating hardware and software components with PCs to create customized instrumentation solutions. So it is practical and of long-range significance that we develop virtual instrumentation. The data collecting system is an important field in which the microcomputer uses. Data that computer control gather and can replace with process system manpower finish a large amount of precision have, carry on homework scene effective means to gather datum. The paper according to the contemporary advanced PC design principle, designing a virtual instrument of realizing data collecting system, in choosing chip, make a point of the stability, accuracy, speed to moderate with price mutually, and make the design match the market regulation. Some work and programs have been done during my design in the survey virtual instrument. It is made of two parts: hardware and software. The main function of the hardware is as following: first, convey analogous signal to Mux, and then push the analogous signal to sampling-holding instrumentation; second, push the data into the A/D converter; last, transmit the digital signal to CPU. These diginal signals are conveyed to the microcomputer through data-bus. My main work is complete the design of hardware, which can accurately transfer analogous signal to diginal signal that can be accepted by micro -computer. And complete the design of software which used the virtual instrumentation. Thesis this introduce every function unit design with the choice of the chip in detail, In content, not only pay attention to the understanding of the basic princip