毕业设计（论文）-三坐标铣床的数控化改造（含图纸）.doc

 毕 业 设 计（论 文） 设计(论文)题目： 姓 名 学 号系 部 专 业 年 级指导教师Abstract Basing on the common milling machine，this thesis reconstructs it and turns it to a NC milling with three coordinate.This reconstructed machine can realize cure line and straight line machining pathway by three axis linkage。 The reconstructed milling machine movements along x，y，and Z are drove by step driver，the AC motor is used in principal axis. All above motors are controlled by single chip.This thesis focuses on designing the mechanism of the and mastering the single chip working principle. Which is including to the dr