MATLAB模拟试题.docVIP

Ⅰ 1. If the matrices are ,，then their MATLAB statements are a= , b= . 2. Assumed a= eye(3), b=ones(2,3), c= zeros(2,3), the results are a= , b= , c= . 3. Given matrix , obtain its rank, inverse and eigenvalue. The accordingly statements are , , . 4. Given the coefficients of two polynomials are a=[1,3,3,1], b=[1,1]. Defined c is the coefficients of a譩.Then, the statement is c= , the return result is c= . 5. Given the transfer function of a system , and defined num= , den=[1 1 4 4]. In MATLAB, its transfer function model description is , its zero-pole model is . 6. Given the coefficients of a polynomial p=[1 3 2]. Then, its roots r= , and the value of the polynomial at x=[5,7,9], v= . Ⅱ 1. The zero-pole model of a system is as follows: . (1) The description of the zero-pole model with ZPK; (2) Convert the above model to transfer function model and state space model; (3) Write out the reurn result of the transfer function model. 2. Have known a system: the transfer function of the forward channel is , the one of the negative feedback channel is H(s)=2. The input is step signal. Please build a model of the system in simulink and display its curve by scope. 3. The block diagram of a system is as follows. , , Obtain the unit step response of the close loop system. 4. The open-loop transfer function of a unit negtive feedback system is as follows: . If the input signal is u=te-2t, t∈(0,10), please obtain the response of the given signal. 5. Given the open loop transfer function of a system is as follows: . (1) Plot the root locus of the close loop system; (2) Obtain the gain K when close loop pole is p=[-1 -2]. III 1. The state space of a control system is , (1) Obta