毕业设计（论文）-ATLAS3306LC_反铲挖掘机总体设计.docVIP

摘 要 毕业设计不仅是一个重要的教学内容，而且是理论联系实际不可缺少的一个重要环节。它的目的是使我们运用所学的有关机械设计的理论和技能，以及各有关先修课程的知识进行一次较为全面﹑综合的设计练习。本次设计的主要内容是工程挖掘机设计，所采用的挖掘机的类型为履带式单斗反铲液压挖掘机。 设计之初，首先对挖掘机总体尺寸的选定做了介绍，其中包括整机质量、斗容量、发动机功率的选定以及整体尺寸、基本参数的计算；其次，在三、四章中对工作装置、回转装置做了简要介绍，其中主要包括动臂、斗杆的连接方案，斗形及都容量的计算，转台及回转机构的选用；第三，在第五章中重点对减速箱的结构设计及校核作了论述，这也是本次设计的重点所在；最后，在最后一章节中对本次设计所采用的液压挖掘机的液压系统作了简单介绍。 本次设计的重点是对工程机械在传动系统上有一个较为清楚的认识，能够简要介绍各传动部件的功用，对所学的原理及设计有一整体的运用。 ：工程机械 挖掘机 液压传动AGraduation Project is an important not only teaching content, but also the lack of integrating theory with practice is not an important part. Its purpose is to enable us to apply the science of the mechanical design of the theory and skills, as well as relevant pre-course knowledge to conduct a more comprehensive and integrated design practice. The design of the main contents of the transmission system engineering design excavator, the excavator of the type used for single-tracked hydraulic excavator backhoe bucket. Design at the beginning, first of all, the overall size of the selected excavator introduced, including the quality of machine, bucket capacity, engine power and the overall size of the selected, the calculation of basic parameters; Second, in three or four chapters of the work of devices, rotary device to do a brief introduction, which mainly include the boom, bucket under the connection program, bucket-shaped and have the capacity, the turntable and the choice of rotating bodies; Third, in Chapter V focus on the structure of Gearbox discussed the design and verification, which is the focus of the design; Finally, In the final chapter in a design of the hydraulic excavator used in the hydraulic system is introduced. This is designed to focus on mechanical engineering in the transmission system; there is a more clear understanding, a brief introduction to the usefulness of the transmission components, the principle of the study and design of the use of a whole. KEY WORDS：Construction machinery excavators; hydraulic transmission 目录 摘 要 I ABSTR