电网生产现场标准化作业应用的设计实现.pdfVIP

电网生产现场标准化作业应用的设计与实现 周爱华，杨华飞，郭宝 国网电力科学研究院信息技术研究所，江苏南京，210003 Design and Completion of Standardization Working Based on Power Production ZHOU Ai Hua ，YANG Hua Fei ，GUO Bao Information Technology Research Department of State Grid Electric Power Research Institute，NanJing,210003 ABSTRACT: The Standardization Working of power 1 引言 production mainly faces toward the detail of every 生产管理系统（Power Production operation. The entire porcess should be refined, Management System，以下简称 PMS）是国家 quantized, standardized and routinized by the 电网公司“SG186”工程八大业务应用中最 references of the laws, technical stanards and specifications of safely power production and the 为复杂的应用之一。建立纵向贯通、横向集 status must be controllable and being controlled. The 成、覆盖电网生产全过程的生产管理系统， realization of standard on-the-spot power production 对实现电网生产集约化、精细化、标准化管 management will be a contribution for the 理、提高公司资产管理水平都具有十分重要 advancement of State Grid management in our 的意义。 country. Production Management System(PMS) is 作为 PMS 现场管理端的延伸，本文所研 one of the eight great operations of State Grid 究的“电网生产现场标准化作业应用”充分 Cooperations SG186 project. As the on-the-spot 考虑了与现有 PMS 无缝集成的要求。根据国 management ends extension of PMS, in this paper, 家电网公司关于现场标准化作业相关的会 the general design, functional design and mobile ends interface definition of the on-the-spot standardized 议精神以及需求规范的具体要求，本文主要 work management is introduced in detail. 以线路巡检、线路检修、变电巡检、变电检 修、高压试验、继电保护六大专业的现场生 KEY WORD: Power