【毕业论文】三爪异型孔电火花加工工艺实验研究.docVIP

三爪异型孔电火花加工工艺实验研究 摘要：与传统的切削加工方法不同，电加工是利用工具电极和工件两极之间脉冲放电时产生的电腐蚀现象对工件进行尺寸加工的加工方法。xperimental Study of Three-jaw Profile Hole Electrosparking Abstract:It is different from tradition cutting process that electromachining is a processing method，which uses the electrocorrosion phenomenon which is produced by pulse discharge between tool electrode and both ends of the workpiece.The article was based on the basic principle and the process characteristics of wire-electrode cutting and Edm molding process.Doing the technology experimental study of three-jaw profile hole electrosparking.The way of slow-fe