电磁引流技术的出钢效率及其影响因素.pdfVIP

46 5 Vol.46 No.5 2010 5 634—640 ACTA METALLURGICA SINICA May. 2010 pp.634–640 ∗ 1) 1) 1) 1,2) 1) 1) 1) Æ, 110819 2) , 115007 , Fe–C , . , . , () , , , , , , . : . , . , , , , TF777, TF341.6 A 0412−1961(2010)05−0634−07 EFFICIENCY AND INFLUENCING FACTORS OF ELEC- TROMAGNETIC STEEL–TEEMING TECHNOLOGY GAO Ao 1), WANG Qiang 1), LI Dejun 1), JIN Baigang 1,2) , WANG Kai 1), HE Jicheng 1) 1) Key Laboratory of Electromagnetic Processing of Materials (Ministry of Education), Northeastern University, Shenyang 110819 2) Bayuquan Iron and Steel Subsidiary, Angang Steel Company Limited, Yingkou 115007 Correspondent: WANG Qiang, professor, Tel: (024 E-mail: wangq@mail.neu.edu.cn Supported by the Science and Technology Program of Liaoning Province (No.2008221015), Liaoning Bai Qian Wan Talents program, and the 111 Project (No.B07015) Manuscript received 2009–12–18, in revised form 2010–03–12 ABSTRACT A new method (electromagnetic steel–teeming method) using electromagnetic induc- tion heating in slide–gate was proposed to overcome the disadvantage of the pollution of the traditional nozzle sand on the molten steel. The basic idea of this new process is to melt part of or the whole of the new ladle well–packing materials (i.e. Fe–C alloy with similar composition of the molten steel), which became the substitute of the traditional nozzle sand, and achieved smoothly molten steel–teeming. Experimental and numerical simulation methods were