多件装夹加工工艺及车夹具设计（有CAD图纸）.pdfVIP

常州机电职业技术学院 毕业设计（论文）说明书 作 者： 学 号： 系 部： 专 业： 题 目： 多件装夹加工工艺及车夹具设计 指导者： 评阅者： 2014 年05 月 毕业设计（论文）中文摘要 本设计是基于车床拨叉零件的加工工艺规程及一些工序的专用夹具设计。零件的主要加 工表面是平面和孔系。一般来说，保证平面的加工精度要比保证加工精度容易。因此，本设 计遵循先面后孔的原则。并将孔与平面的加工明确划分成粗加工和精加工阶段，以保证加工 精度。主要加工工序是第一个支持孔定位加工出顶平面，然后顶平面和孔的位置的孔加工工 艺配套系列。在后续工序中除与顶平面定位技术和加工其他孔与平面的个体的过程。利用坐 标镗削加工孔。一般整个工艺的选择。专用夹具的夹具，夹紧方式多选用气动夹紧，夹紧可 靠，机构不能自锁，因此生产效率高，适合于大批量、流水线上加工，能够满足设计要求。 关键词 车床拨叉类零件；工艺；夹具； 毕业设计（论文）外文摘要 Title： The shaftforkprocessing technologyandfixture design Abstract： This design is the special fixture for machining process of automobile shift lever parts and process design based on. The main processing surface steering lever parts of the plane and the holes. In general, the plane guarantee precision machining is easier than to guarantee the machining accuracy. Therefore, the design follows the surface after the first hole principle. And the hole and the plane processing clearly divided into roughing and finishing stages of processing to ensure accuracy. The main process is the first locating hole processing the top plane, and then the hole processing technology series top plane and the position of the hole. Process in addition to individual and the top plane positioning technology and other processing of the hole and the plane is in in the follow-up process. By using the coordinate boring hole. In general the whole process selection. Fixture fixture, clamping means more choice of pneumatic clamping, clamping reliable, agencies can not lock, therefore the production efficiency is high, suitable for large batch, line processing, can meet the design requirements. Keywords：shifting fork;technology; fixture; 3 目 录 1 前言 1