本体压铸模具的设计（有CAD图纸）.pdf

AUTOCAD AUTOCAD Abstract This paper discusses the push and pull the door handle die-casting mold design method, product materials used for aluminum alloy. The design of the sliding door handle die-casting die casting die design. Determination of the parting surface, gating system, selection of die casting machine, calculating the size of molding components. The center sprue, using the straight guide column, the pushing rod ejector, and a template to complete stripping. At the end of the mold structure and the matching of die casting machine for checking, and use AUTOCAD to draw up a set of mold assembly drawing and parts drawing. Through this design. The casting mold having an initial understanding, attention to some detail problems in the design, understands the mold structure and the principle of work; through the assembly drawing and parts drawing for enhanced AUTOCAD application ability. Keywords: Noumenon, pressure casting, die casting, die casting die 2 1 Abstract 2 3 1 6 1.1 6 1.2 7 1.3 7 1.3.1 7 1.2.3 8 1.3.3 9 1.4 10 2 11 2.1 11 2.1.1 11