基于ug的商用车变速器的三维设计及仿真建模（学士）学位论文.docVIP

基于UG的商用车变速箱三维设计及仿真建模 段 战 锋 （陕理工机械工程学院热能与动力工程专业汽车032班，陕西 汉中 723003） 指导教师：赵永强 [摘要] 本文阐述汽车变速器在汽车中的功用、汽车变速器的工作原理及汽车变速器的设计和发展形势。讨论了汽车变速器的分类情况，阐述了国内外汽车变速器的研究现状。具体说明了汽车机械式变速器的设计步骤及本课题的设计情况。文中表述了该变速器的动力传动方案，计算列举了相关挡位的传动比，设计了变速器的传动齿轮，轴等重要零部件。 利用UG软件进行汽车机械式有机变速器总成设计，并配有重要的零件设计和制作过程。零部件和变速器整体的装配制作过程，以及变速器的运动仿真过程，二维工程图的产生。有限元分析的过程。 [关键词]：汽车变速箱 ＵＧ 三维实体建模 运动分析 The Design and Simulation of 3D Modeling Commercial Vehicle Transmission Gearbox Based on UG Author：uan Zhan-feng （Grade03,Class032, Major Heat energy and power engineering，Mechanical engineering，Shaanxi University of Technology，Hanzhong 723003，Shaanxi） Tutor：hao Yong-qiang [ Abstract ] The article also elaborates the automobile transmission gearbox in automobile function, the automobile transmission gearbox principle of work and the automobile transmission gearbox design and the development situation. Discussed the automobile transmission gearbox classified situation, elaborated the domestic and foreign automobile transmission gearbox research present situation. Specifically explained the automobile mechanical type transmission gearbox design procedure and this topic design situation. In the article has indicated this transmission gearbox power drive plan, and the computation enumerated the correlation to keep off position the velocity ratio, has designed the transmission gearbox transmission gear, the axis and so on the important spare part. This article uses UG software to carry on the automobile mechanical type organic transmission gearbox always to become the design, and has the important components design and the manufacture process. Spare part and transmission gearbox whole assembly manufacture process, as well as transmission gearbox movement simulation process, two-dimensional engineering plat production. Finite element analysis process. [Key words]: gearbox ＵＧ modeling assembling Sport analysis1.绪论 1 1.1 CAD软件在国内外发展现状及研究意义 1 1.2设计开发平台的选取 1 1.3 Unigraphics软件的简介 2 1.4 商用车变速器在国内发展现状 2 1.5 机械式商用汽车变