DPA51CM44B011_相序保护器.pdfVIP

Monitoring Relays 3-Phase Sequence and Phase Loss Type EQB62DN55 Product Description 3-Phase relay for detection of incorrect phase sequence, total or partial phase loss. Supply range from 208 to 480VAC. For mounting on DIN- rail. Housing 17.5mm wide,SPDT relay output,suitable for back and front panel mounting. The device detects regenerated voltage up to 90% of the nominal voltage (phase to phase). Property • 3-phase monitoring relay for phase sequence and phase loss • Detects when all phases are present and have the correct sequence • Measures its own power supply • Power supply range: 208 to 480 VAC (±15%) • Output: 5 A SPDT relay normally energized • For mounting on DIN-rail in accordance with DIN/EN 50 022 • 17.5 mm DIN-rail housing (DIN 43880) • LED indication for relay and power supply ON Type Selection Mounting Output Supply: 208 to 480 VAC DIN-rail SPDT DPA 51 C M44 Input Specifications Output Specifications Input Output SPDT relay, N.E. L1, L2, L3 Terminals L1, L2, L3 Rated insulation voltage 250 VAC Measures its own supply Contact ratings (AgSnO2) μ Measuring range Resistive loads AC 1 5 A @ 250 VAC 208 to 480 VAC 177 to 550 VAC DC 12 5 A @ 24 VDC ON-level % of the phase- phase Small inductive loads AC 15 2.5 A @ 250 VAC voltage