基于MTLAB模拟滤波器设计毕业论文【荐】.docVIP

桂林电子科技大学信息科技学院 毕业设计(论文) 课 题： 滤波器设计方法演示系统 院 （系）： 信息与通信学院 专 业： 通信工程 学生姓名： 楼倩倩 学 号： 0851100106 指导教师单位： 信息与通信学院 姓 名： 苏启常 职 称： 讲师  滤波器设计方法演示系统 摘 要 几乎在所有的工程技术领域中都会涉及到信号处理问题 ，滤波器作为信号处理的重要组成部分，已发展的相当成熟。本文介绍了滤波器滤波器的设计用MATLAB实现滤波器。此设计扩展性好，便于调节滤波器的性能，可以根据不同的要求在上加以实现滤波器MATLAB  MATLAB BASED DESIGN OF ANALOG FILTERS ABSTRACT In almost all areas of engineering and technology will be related to signal processing, signal processing filter as an important component of the development has reached a mature state. This paper introduces the principle of filter and filter analog filters, digital filter design method. Focuses on the design of analog filters and simulation.Analog filter system (including the Butterworth filter and Chebyshev filter) design principles and methods, and on this basis on the analog filters (including low-pass, high pass, band-pass, band-stop) design. On this basis, the use of virtual realization of analog filters MATLAB. Good scalability of this design, easy to adjust the performance of filters can be based on different requirements to be in the realization of MATLAB.Through the MATLAB simulation and realization of, we can see that the traditional design method of analog filters and do not intuitive red, and MATLAB with more stringent scientific computing and graphical display of the advantages of the design showed that the more intuitive, but also to filter accuracy has been greatly improved to better achieve the desired results. At the same time, low-pass analog filters of high pass, band-pass, band-stop conversion of a theoretical KEYWORD: Filtering, Analog filters, MATLAB 目 录 中文摘要 I 英文摘要 II 1 滤波器简介 1 1.1 滤波器的工作原理 1 1.1.1 模拟滤波器的工作原理 1 1.1.2 数字滤波器的工作原理 2 1.2 滤波器的基本特性 3 1.2.1 模拟滤波器与数字滤波器的基本特性 3 1.2.2 无限冲击响应IIR和有限冲击响应F