DYNAMAX DLIS-2K开发文档【荐】.pdf

CONFIDENTIAL - DYNAMAX IMAGING, LLC TM DLIS 2K Programming Manual Sensor Revision B The DLIS 2K/4K is a multi-mode sensor featuring a user programmable timing engine. The sensor contains 4 rows of pixels. Each row contains 16 dark pixels and 2080/4096 optical pixels. Several topics for DLIS operation are discussed in this note as well as useful programming data for use with the DLIS demonstration kit. The main purpose of this document is to describe how the imager is put into and operated in different modes of operation. The different modes of operation are as follows: 1. Normal/ Correlated Double-Sampling (CDS) 2. Ambient light subtraction 3. High Dynamic Range (HDR) 4. Correlated Multi-Sampling (CMS) 5. Non-Destructive Read 6. Binning of different rows 7. High resolution readout 8. Auto Dynamic Threshold (ADT) In addition to sections on each of the different modes, a section is also included on advanced options. Many of these options can be utilized in some or all of the operating modes, but separated out for clarity. A section on how to write a setup file for the Unified Demo board, is also included at the end of this document. The DLIS demonstration kit provides all the listed setup timing files to accomplish different readout modes listed above. Please refer to the Unified GUI User Manual (latest rev.) to setup the demonstration kit. The modes listed above are not the only modes of operation, combinations and permutations are possible by experienced operator. Contact the company for engineering assistance if needed. Digital Linear Image Sensor (DLIS) Timing O