矿用直流不间断电源的设计.pdfVIP

8 工 矿 自 动 化 No. 8 2011 8 Industry and M ine Automat ion Aug. 2011 : 1671- 251X( 2011) 08- 0130- 0 1 2 刘强, 杨昉昉 ( 1. , 00039; 2. , 00039) : 设计了一种煤矿井下交换机用直流不间断电源该不间断电源采用MAX713 电源管 芯片对镍 镉电池进行智能充电; 采用M SP 30F1 7 单片机作为微处 器, 利用外部中断方式监测矿用交流电的工作 状态, 当发现矿用交流电不能正常供电时对电路进行切换, 启动镍镉电池供电, 从而保证交换机持续工作 测试结果表明, 该不间断电源具有一定的实用性 : 矿用交换机; 直流不间断电源; 镍镉电池; 充电; M SP 30F1 7; MAX713 : TD611 : B Design of Mine-used DC UPS 1 2 LIU Qiang , YANG Fang-fang ( 1. Branch of M easurement and Control of Chongqing Research Institute of China Coal T echnology and Engineering Group Corporation, Chongqing 00039, China. 2. Testing Center of Chongqing Research Institute of China Coal T echnology and Engineering Group Corporation, Chongqing 00039, China) Abstract : A DC U PS used in underground exchanger w as designed. The U PS uses MAX713 to make intelligent charging for N-i Cd battery; it takes M SP 30F 1 7 as microprocessor , uses external interruption mode to monitor w orking state of mine-used AC, and it can sw itchover to start N-i Cd battery supply w hen mine-used AC has fault, so as to ensure continuous w ork of exchanger. The test result show ed that the U PS has certain practicality. Key words: mine-used exchanger, DC U PS, N-i Cd battery , charging, M SP 30F 1 7, MAX713 : 0 , UPS U PS , 1 UPS , , ( UPS) U PS