DCS800 Technical presentation_cn_ – 新一代直流传动.ppt

DCS800产品技术特性简介 DCS800 CNIAB Main message: DCSLink via SDCS-DSL-4 board (red circle) SDCS-DSL-4 is an option for drives sizes D1-D4 up to 525 VAC SDCS-DSL-4 comes for free with every drive sizes D3, D4 for 600 VAC SDCS-DSL-4 comes for free with every drive sizes D5 to D7 Advantage: only one communication / connection type witch is used for multiple purposes (field, master-follower, drive-to-drive, 12-pulse) Master-follower is used for motors coupled via their load (e.g. pinch rolls, motors coupled via shaft or gear box, …) Main message: DCSLink via SDCS-DSL-4 board (red circle) SDCS-DSL-4 is an option for drives sizes D1-D4 up to 525 VAC SDCS-DSL-4 comes for free with every drive sizes D3, D4 for 600 VAC SDCS-DSL-4 comes for free with every drive sizes D5 to D7 Advantage: only one communication / connection type witch is used for multiple purposes (field, master-follower, drive-to-drive, 12-pulse) Drive-to-drive communication together with Adaptive Program (AP) or CoDeSys can be used for e.g. small rolling mills. Main message: DCSLink via SDCS-DSL-4 board (red circle) SDCS-DSL-4 is an option for drives sizes D1-D4 up to 525 VAC SDCS-DSL-4 comes for free with every drive sizes D3, D4 for 600 VAC SDCS-DSL-4 comes for free with every drive sizes D5 to D7 Advantage: only one communication / connection type witch is used for multiple purposes (field, master-follower, drive-to-drive, 12-pulse) All 12-pulse modes possible Main message: ABB has external field exciter solutions for a wide variety of applications DCF800 can be used as: External field exciter for all module sizes (D1-D7) Field exciter in DCS800-R0x systems (revamps) DCF803/804 can only be used as external field exciter DCS800-S0x can only be used as external field exciter and is usually installed in a separate cabinet Wide range of current available (from 0.3 A to 520 A) Communication between the armature converter and field exciter via DCSLink (SDCS-DSL-4). This reduces the number of connectio