黄卡基础知识.docVIP

[watermark] UL黄卡中各项目试验要求及解释（UL Yellow Card Related Standards） UL Yellow Card Related Standards Insulation material Certificate 绝缘材料证明 –All material for insulation propose must be this ID 所有为绝缘用途设计之材料需注意以下规定:–UL Yellow Card does not mean meeting the IEC standards, UL CSA VDE.. Safety spec or designers criteria for applications.绝缘材料本身的UL Yellow Card并不代表该材料可以符合用于各种电器电子产品的IEC标准或UL，CSA，VDE等安规.–Whatever, UL issues Yellow Card for the items passed the test only to certify material. It does not confine or approve the applications. Each application should check for its particular requirements. UL发出之UL Yellow Card只是证明该绝缘材料所通过UL的测试项目，它并非限制或认可该绝缘材料可用于所有电器或电子产品。任何之应用都应依照其专属的相关安规中有关绝缘材料之规定。 –UL Yellow Card contents 8 important properties UL Yellow Card包含8个重要特性?Physics properties 物理特性–Thickness, Flammability Rating, Relative Temperature Index (RTI), Hot Wire Ignition (HWI) 厚薄度、防火等级、相对温度指数、热线熔化率。?Electrical properties 电气特性–High Amperage Ignition (HAI), High Voltage Track Rate (HVTR), Arc Resistance (D495), Comparative Tracking Index (CTI) 高电流熔化率、高电压沿路径比率、电弧阻抗及比较路径指数 ?Polymeric materials (Electrical insulation materials)有关化学聚合材料, (电气绝缘材料)之相关安规规定:–Use in electrical equipment applications : UL 746C 用于电器与电子产品: UL746C–Material requirements for internal barrier (electrical insulation) are required to meet various standards or properties of : 此材料作为产品内部隔离用(即电子绝缘用途)时, 必须符合以下不同之标准或特性:?HWI -Hot Wire Ignition 热线熔化率?HAI -High Amperage Arc Ignition 高电流熔化率?UL94V-? -Flammability Classification 防火等级?CTI -Comparative Tracking Index 比较路径指数 ?Others 其它安规规定事项–a. Dielectric breakdown strength: 5000 Vrms minimum. Higher values might be needed to perform acceptable in various products. 耐电压强度：最小5000Vrms以上，在不同产品时可能会要求更高之数值.–b. Volume resistivity : 50 * 106 ohm/cm minimum. Higher values might be required in various end products. 绝缘电阻: 50 * 106 ohm/cm以上，在不同产品时, 可能要求更高之数值.–c. Mold stress relief : No shrinkage, warpage or other distortion to interfere normal operations or reduce electrical