BM1 系列交、直流断路器.docVIP

BM1 系列交、直流断路器 BM1- Series AC、DC Moulded Case Breakers 适用范围 APPLICATION RANGE ●BM1系列塑料外壳式断路器（以下简称断路器）， ●BM1 series moulded case breakers (hereafter reffered to as simply breakers) 是本公司采用国际先进设计、制造技术研制、开 are one of the new type breakers which have been developed by the company 发的新型断路器之一。其额定绝缘电压为800V , using international advanced design and manufacturing technology. The rated 适用于交流50Hz，额定工作电压690V及以下， insulation voltage of the breakers is 800V,suitable for turn -on or turn-off not 额定工作电流至630A的电路中作不频繁转换及 frequently and staring a motor not frequently in the circuit of AC50Hz, rated 电动机不频繁起动（BM1-630无电动机保护型） working voltage 690 V or below-rated working current up to 630A(BM 1 -630 之用。断路器具有过载、短路和欠电压保护功 is motor protection-free).The breakers have overload, short-circuit and under 能，能保护线路和电源设备不受损坏。 voltage protection devices. so as to protect the circuit and power equipment against damage. ●断路器按照其额定极限短路分断能力（Icu）的高 ●The breakers. according to the rated maximal value to short-circuit breaking 低、分为L型（标准型）、M型（较高分断型）、 ability (Icu), would be classified three kinds types L(typical type)，M(second H型（高分断型）三类。该断路器具有体积小、 high breaking type) and H(high breaking type). The breakers are of the 分断能力高、飞弧短（部分规格零飞弧）、抗振动 following characteristics：compact size, high breaking ability, short arc- over 等特点。 distance (some of the “0”arc-over distance)and shakeproof. ●本断路器可垂直安装（即竖装），亦可水平安装 ●The breaker could be installed vertically(upright)or horizontally(transverse). (即横装)。 ●本断路器具有隔离功能，其相应的符合为: ●The breaker has disconnecting function, its corresponding symbol is shown as “ ” ●本断路器产品执行下列标准： ●The breakers comply with the demands of the following standards: IEC60947-1及GB/T14048.1-2000 总则 IEC60947-1 and GB/T14048.1-20