HP-UX下做磁盘镜像.docVIP

环境：系统现有两块磁盘，一块作为主盘，一块作为镜像盘用ioscan -nfCdisk可以查看到两个磁盘/dev/dsk/c0t0d0???????? //此盘为主盘/dev/dsk/c0t2d0???????? //此盘将作为镜像盘用swinstall –l bundle查看系统是否安装MirrorDisk/UX镜像的步骤：1、pvcreate? -f? -B? /dev/rdsk/c0t2d0 //使用参数“-B”创建一个用于镜像的可引导的LVM磁盘：2、vgextend /dev/vg00 /dev/dsk/c0t2d0 //将上一步的LVM磁盘添加到根卷组中3、mkboot /dev/c0t2d0???????????????? //将新磁盘制作成为可引导的磁盘4、 lvextend? -m? 1? /dev/vg00/lvol1?? /dev/dsk/c0t2d0??? lvextend? -m? 1? /dev/vg00/lvol2?? /dev/dsk/c0t2d0??? lvextend? -m? 1? /dev/vg00/lvol3?? /dev/dsk/c0t2d0??? lvextend? -m? 1? /dev/vg00/lvol4?? /dev/dsk/c0t2d0??? lvextend? -m? 1? /dev/vg00/lvol5?? /dev/dsk/c0t2d0??? lvextend? -m? 1? /dev/vg00/lvol6?? /dev/dsk/c0t2d0??? lvextend? -m? 1? /dev/vg00/lvol7?? /dev/dsk/c0t2d0??? lvextend? -m? 1? /dev/vg00/lvol8?? /dev/dsk/c0t2d0??? //将VG00中的所有设备都镜像到镜像盘，-m 1表示拷贝一份镜像，如果文件系统较大，等待时间可能会长一点，如下：# lvextend -m 1 /dev/vg00/lvol1???????????? The newly allocated mirrors are now being synchronized. This operation will take some time. Please wait Logical volume /dev/vg00/lvol1 has been successfully extended.Volume Group configuration for /dev/vg00 has been saved in /etc/lvmconf/vg00.conf# lvextend -m 1 /dev/vg00/lvol2The newly allocated mirrors are now being synchronized. This operation will take some time. Please wait Logical volume /dev/vg00/lvol2 has been successfully extended.Volume Group configuration for /dev/vg00 has been saved in /etc/lvmconf/vg00.conf 第5步：拷贝正确的AUTO文件到新的LIF区# mkboot -a hpux -lq(;0)/stand/vmunix /dev/dsk/c0t0d0# mkboot -a hpux -lq(;0)/stand/vmunix /dev/dsk/c0t2d0? 第6步：指定引导逻辑卷、根逻辑卷、主交换逻辑卷（用swapinfo确定交换逻辑卷在什么地方）、转储逻辑卷,为根和交换镜像拷贝更新包含在BDRA中等启动信息：# lvlnboot -b /dev/vg00/lvol1Volume Group configuration for /dev/vg00 has been saved in /etc/lvmconf/vg00.conf# lvlnboot -r /dev/vg00/lvol3Volume Group configuration for /dev/vg00 has been saved in /etc/lvmconf/vg00.conf# lvlnboot -s /dev/vg00/lvol2Volume Group configuration for /dev/vg00 has been saved in /etc/lvmconf/vg00.conf# lvlnboot -d /dev/vg00/l