基于改进的功率倒置法在GNSS中抑制DME脉冲干扰.pdfVIP

DME Pulsed Interference Suppression Based on Modified Power Inversion Algorithm in GNSS Liuli Li, Wenyi Wang, Dan Lu, Lu Wang, Qiongqiong Jia, Renbiao Wu Tianjin Key Lab for Advanced Signal Processing, Civil Aviation University of China, Tianjin, 300300, China llli_hope@163.com Abstract: The GPS L5, Galileo E5 and Beidou B2 signals are important parts of Global Navigation Satellite System (GNSS), together with other satellite signals to satisfy the requirements for Safety of Life (SoL) applications. However, they are broadcasted within the Aeronautical Radio Navigation Services (ARNS) band where the Distance Measuring Equipment (DME) is already working in, the high power pulsed signal from DME will degrade the performance of GNSS receivers. This paper provides a DME pulsed interference suppression method based on modified power inversion algorithm in GNSS. Normally, power inversion technique is not used in pulsed interference suppression. The proposed method detects pulsed interference before performing power inversion in order to estimate the covariance matrix, making the power inversion technique to be used in suppressing pulse interference. Because the interference power is much higher than the noise level, we firstly use a sliding window to detect DME interference in time domain, if the interference is detected, the samples in the window are transformed to FFT domain to identify the number of DME interference. Then, the number of array elements is selected adaptively according to the number of interference. Finally, power inversion algorithm is utilized to suppress DME interference. Performance of interference su