2205_Q235大面积双相不锈钢复合板性能分析.pdf

焊管 33 3 2010 3 25 2205/Q235 1, 2 3 2 2 毕宗岳 , 丁宝峰, 张 峰, 金时麟 ( 1. , 710048; 2., 721008; 3. , 100083) : 针对油田对集输管线用板材较高抗腐蚀性的要求, 采用爆炸焊接技术, 对 2205双相 不锈 与碳 Q235进行爆炸焊接,研制出了 10000mm (长 ) 1400mm (宽) 14mm (厚)大 面积双相不锈 复合板材, 其中不锈 层厚度为 2mm检测结果表明: 复合板材的剪切强度 及其他力学性能均达到或超过标准要求; H IC试验和 SSCC试验加载为 72% R t 0. 5时均未出现 - 任何裂纹;在 H S, CO , Cl 共存的气相腐蚀介质中,试样蚀速率为 0. 045mm /a; 两种材料的复 2 2 合界面 SEM 观察及元素分析表明, 2205双相不锈 与Q235完全实现了冶金结合 : 2205/Q235双相不锈 ; 爆炸焊; 复合材料 : TG421 : : 1001- 3938( 2010) 03- 0025- 04 PerformanceAnalysis ofLargeArea 2205/Q235 Duplex Stainless SteelCompositePlate 1, 2 3 2 2 BI Zong-yue , DING Bao-feng , ZH NG Feng, JIN Shi-lin ( 1. School of M aterial Science Eng ineering of X i an University of T echnology, X ian 710048, China; 2. B aoj iP etrole m SteelP ipe Co. , L td, Baoj i 721008, Shaanx,i Ch ina; 3. S chool of M aterials Science and Engineering, Univers ity of Science and T echnology Beinj ing, B eij ing 100083, Ch ina) Abstract: mi ing at the requirement of higher corrosion- resistant steel plates for gathering and transporting pipeline, the explosivewelding technologywas used to 2205 duplex stainless steelandQ235 carbon steel, and large-area duplex stainless steelcomposite platew ith 10000( length) 1400(w idth) 14 ( thickness )mm was developed, inwhich the stainless steel thicknesswas 2mm. Test results showed that the shear strength and ot