制革工业高浓度含硫废水处理的试验研究.pdfVIP

第33 卷 第19 期 中 国 皮 革 Vol. 33 No. 19 2004 年 10 月 CHINA LEAT HER Oct. 2004 Studying on high- concentrated sulfur waste water treatment in tannery industry 1 1 2 傅剑锋 阎怀国 王三反 ( 1. 天津大学环境科学与工程学院, 天津300072; 2. 兰州铁道学院环境工程系, 兰州730070) 1 1 2 Fu J ianf eng , Yan H uaiguo , Wang Sanf an ( 1College of Environmental Science and Engineering, Tianjin University, Tianjin 300072; 2School of Environmental and Municipal Engineering, Lan hou Jiaotong University, Lan hou 730070) 在制革工业中, 高浓度的含硫废水占废水总量COD 的40% ~ 50% , 直接排放会对环境产生严重的污染 过对制革工业含硫废水处理方法的探讨, 并根据试验结果, 对真空内循环负压法处理高浓度含硫废水进行了 试验验证, 提出了最佳工况条件, 同时做了经济分析, 为实际生产的运转成本处理效果设备构型等方面, 提 供了可靠依据 含硫废水 制革工业 脱硫装置 TQ 59 A Abstract In tannery process, abo t high- concentrated s lf r waste water of containing 40% ~ 50% COD is s ally dis- charged into sewerage system ca sing serio s environmental impact. In this paper, methods of treating high- con- centrated s lf r waste water in tannery ind stry were disc ssed. Based on the experimental res lts, vac m- cir- c lation method was investigated and the optimal operational parameters were confirmed, and made comparisons with economic. It was f ndamental for practical operation, treatment effects, and the progress of instr mental constr ction. Key words s lf r waste water tanning ind stry des lph rizing eq ipment , , : [ 1] [ 2] , 500 , 2% ~ 3% , COD , 70% 30 000~ 50 000mg/ L, , 4 000mg/ L, ,, , 40% ~ 50%