外贴式液位计(英文版).docVIP

External Liquid Level Gauge 13L129-61 Manual book SHAANXI SHENGKE ELECTRONIC TECHNOLOGY CO.L 1. Product overview External liquid level gauge using the advanced signal processing technology, avoid the influence of the thick wall of tank, realize the non-contact detection between liquid inside and tank wall. The probe is installed under the tank which to be detected, no need to drill on the tank wall, it’s easy to install. The installation and debugging can be done online, no effect on production. SK external liquid level indicator realize the accurately detect of the flammable, explosive and poisonous liquid (strong acid and strong base) level and kinds of pure liquid level, and no special requirement for the tank material and liquid material, with flame-proof design, meet the explosion-proof requirements, can be widely used. Sonar external liquid level gauge produced according the enterprise’s standard Q/SK 001-2013. 2 Work Principle External liquid indicator uses the principle of sonar ranging collecting the sonar signal by the special probe fixed outer wall of the tank.?Taking the proprietary High-Speed sonar wave processing technology as the core, then by the SHAN XI SK’S Proprietary Method to calculate the level Data and transmitting data to the control center. Indicator can send the data to the control center by the (4-20)mA analog signal, HART, RS-485, Ethernet connector, meanwhile by Wi-Fi,Bluetooth,HART,RS-485, infrared, Ethernet debugging online. As picture 1 showing, When Measuring, the sonar wave signal send from the probe, Signal reflected when meet the liquid level, the probe detects echo signal. Echo signal analyzed by proprietary algorithm to calculate the time (t),.Device system will calculate the liquid level data according to the formula. H=v*t*a/2 H: liquid level height a: Correction coefficient v: The speed of the sonar wave propagation in liquid t:The time from the sonar wave return P