朗读37063.docVIP

3 围护墙侧向变形（测斜）监测点布置应符合下列要求： 3 enclosure wall lateral deformation (dip) monitoring point arrangement shall meet the following requirements: （1）监测点宜布置在围护墙中间部位，布置间距宜为20m～50m，每侧边监测点至少1个； (1) the monitoring should be arranged in the middle of the enclosure wall, the appropriate distance is 20 m and 50 m, at least one of each side monitoring; （2）监测点布置深度宜与围护墙（桩）入土深度相同。 (2) monitoring layout depth should be the same as the circumference wall capacity (pile). 4 围护墙侧向土压力监测点布置应符合下列要求： 4 enclosure wall lateral earth pressure monitoring point arrangement shall meet the following requirements: （1）监测点宜布置在受力较大及有代表性的围护体外侧； (1) the monitoring should be arranged on the lateral stress is larger and the representative of the body; （2）监测点平面间距宜为20m～50m，且每侧边监测点至少1个； (2) the appropriate monitoring plane spacing is 20 m and 50 m, and at least one of each side monitoring; （3）监测点垂直间距宜为3m～5m，宜布置在土层中部，可预设在迎土面及迎坑面入土段的围护墙侧面。 (3) suitable for monitoring the vertical spacing of 3 m ~ 5 m, appropriate layout in central soil, presetting welcomed in soil surface and face side of the grave pit enclosure wall side. 5 围护墙内力监测点布置应符合下列要求： 5 enclosure wall internal force monitoring point arrangement shall meet the following requirements: （1）监测点宜布置在受力较大围护墙体内； (1) monitoring stations should be set in stress within the larger retaining wall; （2）监测点平面间距宜为20m～50m，且每侧边监测点至少1个； (2) the appropriate monitoring plane spacing is 20 m and 50 m, and at least one of each side monitoring; （3）监测点竖向上宜布置在支撑点、拉锚位置、弯矩较大处，垂直间距宜为3m～5m。 (3) the appropriate on monitoring the vertical layout in the anchor, the anchor position, bending moment, with strong vertical spacing appropriate for 3 m ~ 5 m. 6 冠梁及围檩内力监测点布置应符合下列要求： Six crown beam and wai purlin internal force monitoring point arrangement shall meet the following requirements: （1）监测点宜布置在每侧边的中间部位、受力较大、支撑间距较大处；在竖向上监测点的位置宜保持一致； (1) the monitoring should be arranged in the middle of each side parts, more stress, with strong support spacing; Monitoring stations in the