二维调制技术平衡单相两桥级联的电容电压.pdfVIP

Two-Dimensional Modulation Technique with DC Voltage Control for Single-Phase Two-Cell Cascaded Converters Jose I. Leon, Sergio Vazquez, Ramon Portillo, Leopoldo G. Franquelo and Eugenio Dominguez Electronic Engineering Department University of Seville Seville, Spain 41092 Email: jileon@gte.esi.us.es Abstract—In this paper, a simple feed-forward modulation H-bridge of the converter. The external one is a conventional technique for single-phase two-cell multilevel cascaded converters controller where the error of the total dc-link voltage is used to is presented. All the possible switching states of the power determine the active power needed in the next sampling period. converter are taken into account applying a two dimensional control region. The proposed technique uses the actual values of This active power is used to calculate the reference phase the DC-Link capacitor voltages to obtain output phase voltages current which is controlled by a PI controller determining the and currents with low harmonic distortion with any dc voltage in reference phase voltage to be generated by the converter. It the H-bridges of the cascaded converter. The possible switching has to be noticed that in this work, a resonant filter to avoid sequences of the converter are studied and, depending on the the 100 Hz oscillations of the dc voltages is used to calculate actual dc voltage values, their desired values are achieved. Simulation results are shown in order validate the proposed the active power reference. technique working as a synchronous rectifier. This paper is mainl