换热管与管板的机械胀接工艺.pdfVIP

广东诧工 2008年第4期’ ．104． WWW．gdchem．com 第35卷总第180期 换热管与管板的机械胀接工艺 杨玉欢1，邱朝放2 (1。四会带广恒石化设备安装有限公司技术部，广东四会526200； 2。广东远大槐械集团有限公司技术酃，广东韶关512032) 【攘要】文章分缨了换熬管冬管教瓣黢按，英孛撬械毅接窿予缆瘫多，搡掺麓单，嚣魏瘦麓广泛。为了硷查获管戆 质量、管材的胀接慷能，确定最佳的胀度，梭验胀接部位的外观质激及接头的密封性能，测试胀接接头的抗拉脱力，在 正式胀接前应进行试胀，通过试胀，检验合格，选定最佳胀度，待妪式胀接时采用。 涨键谲】挨热管；蕾板；账寝；视棱涨援 Mechanical ofTubeHeat Sheet andTube ExpandingTechnology Exchanger YangYuhuanl，QiuChaoqi2 PetrocemicallInstallation (1．TechnicalDepartment，SihuiGuangheng Co．，Ltd．，Sihui526200； Engineering 2。Technical Yuanda MachineryCo．，Ltd．，Shaoguan512032，China) Department,Guangdong tube in Abstract：The ofheat and sheetwagintroducedthe mechanical technologyexchanger expanding expanding paper,the had is hasbeen used，Inordertocheckthe of tube technologymanyadvantages，itsoperationsimple，therefore，itwidely qualityexpanding andthe characteroftube thebest thesurface of andthe expanding material，determineexpansioncoefficient，testqualityexpandingpart enclosure thetensileresistanceof shouldbedonebeforeformal character,test expandingjoint，tryingexpanding expanding．Throughtrying test waschosenwhenformal expanding,theresults鞫辩qualified,bestexpandingdegree expanding。 heat