FAA_p606飞行区灯具密封胶技术规定.docVIP

ITEM P-606 ADHESIVE COMPOUNDS, TWO-COMPONENT FOR SEALING WIRE AND LIGHTS IN PAVEMENT DESCRIPTION 606-1.1.? This specification covers two types of material; a liquid suitable for sealing electrical wire in saw cuts in pavement and for sealing light fixtures or bases in pavement, and a paste suitable for embedding light fixtures in the pavement.?Both types of material are twocomponent filled formulas with the characteristics specified in paragraph 6062.4.?Materials supplied for use with bituminous concrete pavements must be formulated so they are compatible with the bituminous concrete. * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * If the material is to be used on bituminous concrete pavements and it is not formulated for this use, cracking and separation of the material from sawed wireway kerfs and around light fixtures may occur. * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * EQUIPMENT AND MATERIALS 6062.1? CURING. When prewarmed to 77°F (25°C), mixed, and placed in accordance with manufacturers directions, the materials shall cure at temperatures of 45°F (7°C) or above without the application of external heat. 606-2.2 STORAGE.? The adhesive components shall not be stored at temperatures over 86°F (30°C). 606-2.3 CAUTION.? Installation and use shall be in accordance with the manufacturers recommended procedures.?Avoid prolonged or repeated contact with skin.? In case of contact, wash with soap and flush with water.? If taken internally, call doctor.? Keep away from heat or flame.? Avoid vapor.? Use in wellventilated areas.? Keep in cool place.? Keep away from children. 606-2.4 CHARACTERISTICS.? When mixed and cured in accordance with the manufacturers directions, the materials shall have the following properties shown in Table 1. SAMPLING, INSPECTION, AND TEST PROCEDURES 6063.1? TENSILE PROPERTIES.? Tests f