103钢管输电塔环形加肋节点承载力分析.pdfVIP

第42 卷第2 期 建 筑 结 构 Vol ． 42 No ． 2 20 12 年2 月 Building Structure Feb ． 20 12 钢管输电塔环形加肋节点承载力分析 1 1 1 2 白 强 ， 曾德森 ， 舒爱强 ， 李正良 (1 中南电力设计院，武汉43007 1 ;2 重庆大学土木工程学院，重庆 400044 ) ［摘要］ 通过试验对 1 / 4 和 1 / 2 环形加肋钢管插板连接节点基于钢管控制的极限承载力进行了研究。在此基础 上，根据能量理论和虚功原理，提出了适用于估算此类节点极限承载力的分析模型，用数值分析方法得出了节点极 限承载力，并与试验结果、有限元和 AIJ 计算结果进行了比较，证明该理论分析模型的适用性较好。 ［关键词］ 环形加肋; 钢管节点; 屈服线模型; 极限承载力; 虚功原理 中图分类号:TU392. 3 文献标识码:A 文章编号:1002 -848X (20 12)02 -0 103 -04 Analysis on strength of tube-gusset j oints in steel tubular tower with annular ribbed plate Bai Qiang1 ，Zeng Desen1 ，Shu Aiqiang1 ，Li Zhengliang2 (1 Central Southern China Electric Power Design Institute ，Wuhan 43007 1 ，China ; 2 Department of Civil Engineering ，Chongqing University ，Chongqing 400044 ，China) Abstract :Experimental study was performed to investigate the behavior and strength of tube-gusset joints with 1 / 4 and 1 / 2 annular ribbed plate ． Based on energy theory and virtual work principle ，analysis model for calculating the ultimate bearing capacity of tube-gusset joints was put forward ，ultimate bearing capacity of tube-gusset joints was obtained through numerical method ． Compared the strength of joint which obtained according to above model with the results of experiment ， FEM and AIJ ，it is proved that the calculation method model has the theoretical and practical significance for design ． Keywords :annular ribbed plate ;steel tubular joint ;yield line model ;ultimate bearing capacity ;virtual work principle 0 引言 工程设计提供一定的理论参考依据。 输电铁塔的节点构造是铁塔设计的