AISC335钢结构技术规范补充第1条.pdfVIP

AISC 335-89s1 Supplement No. 1 to the Specification for Structural Steel Buildings Allowable Stress Design and Plastic Design (June 1, 1989) Approved by the AISC Committee on Specifications and issued by the AISC Board of Directors December 17, 2001 AMERICAN INSTITUTE OF STEEL CONSTRUCTION, INC. 2 Copyright © 2002 by American Institute of Steel Construction, Inc. All rights reserved. This book or any part thereof must not be reproduced in any form without the written permission of the publisher. The information presented in this publication has been prepared in accordance with recognized engineering principles and is for general information only. While it is believed to be accurate, this information should not be used or relied upon for any specific application without competent professional examination and verification of its accuracy, suitability, and applicability by a licensed engineer, architect or other professional. The publication of the material contained herein is not intended as a representation or warranty on the part of the American Institute of Steel Construction, Inc. or of any other person named herein, that this information is suitable for any general or particular use or of freedom from infringement of any patent or patents. Anyone making use of this information assumes all liability arising from such use. Caution must be exercised when relying upon other specifications and codes developed by other bodies and incorporated by refe