威力交换机环网设置.pdfVIP

SWITCH TEST REPORT (TEST 200 Switch ) Test Report : version 1.0 Tester ：Jim Lee E-mail ：jimlee@ Contact Window ：Jim Lee Chapter 1. The results of test cases are summarized Chapter 2. About Ring Chapter 1 Test result summary PART A Single function test Test Case NO. Test Case Title Test Case Subtitle Pass/Fail 1 Ring Reliability test Ring Packet 1.1 Pass transmission 1.2 Recovery Time Test Recovery Time 10ms Pass 1.3 Ring Mater Fault TEST Pass 1.4 Any Switch Fault TEST Pass PART B Single function test 1. Ring Reliability test Test Case NO. 1.1 Test Case Ring Packet transmission Title We join 200 Switch to turn into Ring , utilize IXIA , convey the packet Purpose tests it under the environment of Ring , whether the conveyance of the packet is normal. Conveyingytes Packet via LINK A to LINK B really receivesbytes Packet, verify under the environment of Ring , the conveyance of Packet , there is no Loss . Specifics Pass/Fail Pass Note Test Case NO. 1.2 Test Case Recovery Time Test Title We join 200 Switch to turn into Ring , convey 50,000 Packet via LINK Purpose A , is received 50,000 Packet by LINK B, if Link Down a Cat 5E Link among them at this moment, verify Recovery Time10ms. We test it five times in succession, we find Recovery Time lie between 2ms, ~ 9ms, , it verifies Recovery Time 10ms TEST 1 Specifics TEST