07 Installation to Hard Disk.docVIP

7. INSTALLATION TO HARD DISK 7.1 System Requirements Operating system: 32-bit HSC version: Windows 95, 98 (+SE recommended), NT (+SP6), Me (+Security update + System update), 2000 and XP. Processor: Pentium 100 MHz or faster Memory: 64 MB or more Disk space: 55 MB (Setup may need temporary 65 MB) Monitor: VGA or better Mouse: Windows compatible System requirements of HSC are very typical for all Windows programs. For example, a fast Pentium processor, 256 MB of memory, fast video graphics card and fast hard disk improves working efficiency decisively. Hard disk and HSC-operation speed may be increased with Windows System tools (ScanDskw.exe and Defrag.exe) and especially with Diskeeper?-software. 7.2 Installation HSC is installed in the same way as most other Windows programs: It is not necessary to remove the old HSC 4.0 version if you want to upgrade to HSC 5.0. It can still be used if the new 5.0 is installed in a different directory. However, all old HSC 5.0 (beta) versions must be uninstalled before new HSC 5 installation with Windows Control Panel Add/Remove Programs Dialog. Close all other Windows programs, but not Windows itself. Note that you must also close, for example, the MS Office icon bar, because it has loaded some programs to the memory. Otherwise the HSC installation program can not upgrade those libraries which are in use. You can press “Ctrl, Alt, Delete” to view and close all the running programs. Do not, however, close EXPLORER and SYSTRAY under Windows 95 and 98. Insert HSC CD in your drive. Select Start Run: from the Menu (or use Add Programs from Control Panel.) Locate SETUP.EXE from HSC CD and press Enter. Answer questions. Restart Windows when installation is complete. If you have problems see chapter 7.4. Note that you may have to Log on to your computer as Administrator in order to install HSC 5.0, however, this depends on your computer settings and Windows version. Installation into a network server: Use same procedure as for