ISO116662010焊接的无损检测超声波检测验收标准(英文版）.pdfVIP

INTERNATIONAL ISO STANDARD 11666 First edition 2010-12-15 Non-destructive testing of welds — Ultrasonic testing — Acceptance levels Contrôle non destructif des assemblages soudés — Contrôle par ultrasons — Niveaux dacceptation Reference number ISO 11666:2010(E) © ISO 2010 ISO 11666:2010(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobes licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the responsibility of not infringing Adobes licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below. COPYRIGHT PROTECTED DOCUMENT © ISO 2010 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without