CAD制图标准(中英文).docVIP

中文标题 CAD制图标准 Chinese Title 英文标题 Standard of CAD drawings English Title 格式编号 ST-ITT003B 文件编号 ST-PER005A 文件属性 □ ISO Style SN File No. File Type ■ No ISO 发行部门 PE 编 制 人 董明亮 Dong Mingliang 文件类别 ■ Rules □ Procedure □ Guide Issued by Prepared by File Class 部门审批 批 准 Checked by Approved by 评 审 PE / PP / IT Reviewed by 发行日期 2007.3.14 文件等级 □ 公司 Corporation 页 数 7 Date Grading ■ 部门 DepartmentPages CAD制图标Standard of CAD Drawings 为图纸规关的绘图规 To better manage drawing making, here below are some drawing rules: 1 图纸规Drawing Rules 1.1 图框边 Drawing Frame and Periphery图框线实线绘边线用细实线绘 Drawing frame is to be made in continuous thick line, and the periphery is to be in continuous thin line. 1.2 标题栏 Title实线绘边边图框线余用细实线绘填写称5号字3.5号字3号字2号字图号5号字 Frame is to be made in continuous thick line, with its right and bottom line overlapping the drawing frame, others are to be made in continuous thin line. Title must be in size 5 for Chinese, and 3.5 for English, and text are to be written in size 3 for Chinese and 2 for English, drawing No. and material are also expected to be in size 5. 1.3 图号栏Drawing No. 外框大小12×55，用细实线绘标题栏图号文字(即5号字)Frame is to be made in the size of 12 X 55, in continuous thin line, text is to be in the same size (5) as the title. 1.4 明细栏Specification 每增加一行，间9mm，字高：中文：3，英文：2.5，宽0.75。 Row space is 9mm, character height:: 3 for Chinese, 2.5 for English, width≤0.75. 1.5 字体 Font 图纸单称_GB2312外，其余用HZ(romans,hzjd)字体。 Except company name may use楷体_GB2312, all font in the drawings are requested to be in HZ(romans, hzjd) 1.6 图线Drawing Line 1.6.1 图线为细2线的宽为0.35mm细线的宽为0.13mmDrawing line includes two types: thick line, with the width of 0.35mm; and thin line, with the width 0.13mm. 1.6.2 同一图样类图线的宽应虚线点线及双点线线长间应Lines for the same drawing shall be in the consistent width, dashed line, dotted line and double dotted line must be in the consistent length and space. 1.6.3 绘圆对称线时应圆2～5mm；首末两应线圆心应线点较图形上绘细点线双点线难时细实线Center line shall be 2-5mm outside the circle; the star