Design and Airgap Flux Density Calculation of DualRotor PermanentMagnet Wind Generator.pdfVIP

Design and Airgap Flux Density Calculation of Dual-Rotor Permanent-Magnet Wind Generator Jianghua Cao, Xiangyu Yang, Wenjuan Zhu College of Electric Power South China University of Technology Guangzhou, China jianghcao@126.com Abstract—Dual-rotor permanent-magnet wind generators can design. Finite element method can obtain a detail distribution substantially improve the utility of wind power even at a low of the magnetic field, yet it can only be performed after the wind speed due to its high relative speed between the magnetic preliminary dimensions of the motor have been determined and field and windings. This paper briefly introduces its principle is time-consuming, while the equivalent magnetic circuit and structure, establishes its equivalent magnetic circuit based on method is simple and precise enough. The equivalent magnetic the open-circuit flux distribution of the designed motor, and then circuit method is applied to analyze the four traditional rotor calculates the airgap flux density, which takes into account the configurations with surface-mounted, interior radial, interior slotting effect, saturation in magnetic bridges, airgap and end tangential and hybrid PMs respectively in [3-6]. The leakage. In addition, the finite-element method and a prototype calculation methods are typical and feasible